Option Installation 3-7
1.
Insert the metal tabs on the top of the system cover into their slots on the chassis.
2.
Insert the metal tabs on the bottom of the system cover into their slots on the
chassis.
Figure 3-6 Replacing the Minitower Cover
3.
Slide the cover forward to meet the front panel.
NOTE:
The cover fits tightly. If the cover does
not slide all the way to the front panel, place one
hand on the front of the unit while you slide the
cover forward from the rear.
4.
Secure the cover with the three thumb screws. (See “Removing the Minitower
Cover” earlier in this section.”)
5.
Reconnect all external peripherals.
6.
Plug in your power cables.
Expansion Boards
The computer supports ISA Plug and Play expansion boards. Plug and Play expansion
boards allow installing a board in an expansion slot without changing the hardware settings.
There are no system resource conflicts to resolve. Plug and Play automatically configures
the board for the system.
Industry-standard 8- 16-bit, ISA and 32-bit PCI expansion boards are supported in the
system unit. ISA expansion boards can either be Plug and Play or non-Plug and Play boards.
Summary of Contents for POWERMATE P2166
Page 217: ...Index 4 ...
