1-10 Setting Up the Computer
!
CAUTION
Ensure that the power service connection is through
a properly grounded outlet.
NECCSD recommends that you plug the computer
into a surge suppresser for protection against
sudden transient increases or decreases in electrical
power that could damage your computer’s power
supply and result in loss of data.
If the computer does not turn on, press the power button
on the front panel (see the following figure). Use the
lamps on the front panel to verify that the power, hard
disk drive, and LAN connections are working as follows:
Power-on (green)/Sleep mode (yellow)
Hard drive activity (green)
LAN activity (green).