2-22 Using NECCSD Utilities
On PME
This field controls how the system responds to a PCI
Power Management Enable (PME) wake up event. The
choices are “Power On” (the default) and “Stay Off.”
Boot Order
These fields allow you to set the order in which the
system’s drives boot up. The default order is:
Hard disk
LANDesk
®
Service or network
Diskette drive.
Hard Drive
This field lists the bootable hard disk drives in the
system as well as bootable ISA boards. Use this field to
change the booting order.
Removable Devices
This field lists the bootable removable device drives
(diskette, Zip, CD-ROM, etc.) in the system as well as
their booting order. Use this field to change the booting
order.
Boot Time Diagnostic screen
When set to enabled, this field allows you to display the
Diagnostic Screen during boot up. The default setting is
“Disabled.”
Floppy Check
When set to “Enabled,” this field verifies the floppy type
during boot up; “Disabled” (the default) speeds up the
boot. This field is not applicable to the PowerMate
NetPC.
