2-18 Using NECCSD Utilities
5.
Use the arrow keys to select
Exit
.
6.
Select Exit Saving Changes. Press
Enter
.
7.
At the prompt, to confirm exiting setup, press
Enter
.
The password takes effect the next time you power on
the system. You must enter a password the next time
you power on.
Clear User Password
Use this field to clear a User Password. To clear the
password, highlight the field and press
Enter
. Setup
displays a confirmation window. Press
Enter
to clear the
password. If you do not want to clear the password,
highlight
No
in the confirmation window and press
Enter
.
User Setup Access
Use this field to prevent a user from accessing the Setup
utility. The default setting is “Enabled,” which allows the
user to access Setup. To prevent the user from accessing
Setup, highlight the field and press
Enter
. Then highlight
“Disabled” and press
Enter
again.
Using a Password
After you set the password in Setup and reboot the system,
a password prompt appears each time you power on the
system.
To use the password, type the password at the password
prompt and press
Enter
.
NOTE
For security, characters you enter do not
appear on the screen. Enter the password carefully.
