manualshive.com logo in svg

NEC POWERMATE NETPC, System Administrator Manual, Page: 77 / 125

Share
Download
NEC POWERMATE NETPC System Administrator Manual Download Page 77

    

 Reviewing System Features   3-11

Sound System

 The Yamaha sound system installed on the system board
provides compatibility with Sound Blaster Pro™, Sound
Blaster™ 2.0, Ad Lib™, MPU-401, and Microsoft®
Windows Sound System™ for PC sound applications.

 For detailed sound specifications, see the “System
Specifications” in Appendix B.

Plug and Play Support

 The computer comes with a Plug and Play BIOS that
supports Plug and Play technology. Plug and Play
eliminates complicated setup procedures for installing Plug
and Play expansion boards.

 With Plug and Play technology, you add a Plug and Play
expansion board simply by powering off the system,
installing the board, and powering on the system. There are
no jumpers to set and no system resource conflicts to
resolve. Plug and Play automatically configures the board
for the system.

 The system also supports non-Plug and Play boards.

 

Summary of Contents for POWERMATE NETPC






























































































































Reviews:

No comments