![background image](http://html.mh-extra.com/html/nec/powermate-netpc/powermate-netpc_system-administrator-manual_248693041.webp)
Using NECCSD Utilities 2-17
Supervisor Password Is
This read-only field lets you determine whether a
Supervisor Password has been set. This field can be either
“Clear” or “Set.” The default is “Clear” (no password has
been set).
When both the User Password and Supervisor Password are
Enabled, only the Supervisor Password gives you full
access to all Setup fields.
Set User or Supervisor Password
The password fields allow you to enable a user-level
password or supervisor-level password during POST and to
enter Setup.
Use the following procedure to set a password.
1.
Using the arrow keys, select Security from the menu bar.
The Security menu appears.
2.
Select “Set Supervisor Password” or “Set User
Password” with the plus (+) or minus (-) keys.
NOTE
Once the Supervisor Password feature is
enabled, the Setup Utility can only be accessed by
entering the password.
3.
With the password field selected, press
Enter
. Setup
displays a dialog box with the following prompts:
Enter new password: [ ]
Confirm new password: [ ]
4.
Type the password (passwords are not case sensitive)
and press
Enter
. Reenter the password and press
Enter
again.