![background image](http://html.mh-extra.com/html/nec/powermate-ct/powermate-ct_user-manual_248659092.webp)
Installing Options 4-11
Removing the expansion board retainer bar
A – Retainer Bar Tabs
B – Tab Slots
Removing an Expansion Board
To remove an expansion board, use the following steps.
1.
Remove the cover (see “Removing the Cover” earlier in this chapter).
2.
Label and unplug any cables connected to the board.
3.
Remove the retainer bar (see “Removing the Retainer Bar”).
4.
Pull the board out of the connector and expansion slot (see the
following figure). Set the board on an antistatic surface.
If you are removing an AGP board, press out on the board’s locking
lever while pulling the board out of its connector.