![background image](http://html.mh-extra.com/html/nec/powermate-ct/powermate-ct_user-manual_248659113.webp)
4-32 Installing Options
!
Use your stored rails on a new device if it doesn’t have the correct
type of rail.
!
When you convert the chassis to a desktop or a minitower, always
move the stored rails for the new position as well.
For instructions on removing or replacing rails, covers, or devices, see the
following sections:
!
“Removing or Replacing a Bay Cover”
!
“Storing and Retrieving Unused Rails”
!
“Removing or Installing Device Rails”
!
“Removing a 5 1/4-Inch Accessible Device”
!
“Installing a 5 1/4-Inch Accessible Device.”
Removing or Replacing a Bay Cover
If your system has an empty 5 1/4-inch device bay, it is covered with a
special bay cover. This cover physically protects the inside of the chassis,
and its metal shielding offers EMF protection.
See the following sections for information on removing or replacing a bay
cover.
Removing a Bay Cover
Remove a bay cover by following these steps.
1.
Remove the system cover and front panel.
2.
Press the tabs on either side of the cover inward until they are
released from their slots (see the following figure). The tabs are at the
end of rails inside the chassis.
3.
Still holding the tabs, slowly slide the cover out along the rails. As
soon as the cover is free of the chassis, the cover and the rails
disassemble.