Installing Options 4-37
3.
Press the tabs on either side of the device inward to unlatch the
device from the chassis (see the following figure).
4.
Slide the device out of the accessible device cage in the chassis.
Removing a 5 1/4-inch device
5.
Remove the rails from the old device (see “Removing or Installing
Device Rails”).
If the bay is to remain empty, see step 6 only. If you are installing a
new device, skip to step 7.
6.
If the bay is to remain empty:
!
Store the rails in the empty bay (see “Storing and Retrieving
Unused Rails”).
!
Place the bay cover over the bay (see “Replacing a Bay Cover”).
!
Replace the front panel (see “Replacing the Front Panel”) and
the cover (see “Replacing the Cover”).
7.
If you are installing a new device in the bay:
!
If necessary, place the rails on the new device (see “Removing or
Installing Device Rails”).
!
Install the device using the instructions in “Installing a
5 1/4-Inch Accessible Device.”