Reviewing System Features 1-13
If you have an optional internal or external modem installed, you can use
the Wake On Ring (WOR) and Resume On Ring (ROR) features of your
system. With WOR, your system can be powered up through the modem
from either the Soft Power Off or ACPI modes. The first call through the
modem powers on the system and a second call allows access to your
system.
The ROR feature allows a single call on your modem to resume system
operation and allow you system access. The ROR feature can be used
while the system is in the sleep mode or the ACPI power on state.
See Chapter 3, “Configuring the System,” for information on setting the
WOR and ROR features through the system’s BIOS. In addition, for the
WOR feature, a cable must be connected to the modem and to the WOR
connector on the system board.
Hard Drive
All systems come standard with a 10-GB or higher Ultra DMA66 hard
drive with Self-Monitoring, Analysis and Reporting (SMART
®
)
technology.
Network Board
Some systems come with an Intel
®
EtherExpress
®
10/100
Ethernet network board, an Accton 10/100 TX4 or TX5 Ethernet network
board, or a 3Com
®
10/100 3C905C TX-M Ethernet network board
installed in a PCI slot.
Fax/Modem Board
Some systems come with a V.90 PCI fax/modem board installed in a PCI
slot. Connect your telephone line to this board.
AGP Video Board
Systems come with an AGP 4X video board. Connect your monitor to the
VGA connector on this board.