background image

First Printing — May 2001

Copyright 2001

NEC Computers Inc.

15 Business Park Way

Sacramento, CA  95828

All Rights Reserved

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related
materials, is the valuable property of NEC Computers Inc. and/or its licensors.
NEC Computers and/or its licensors, as appropriate, reserve all patent, copyright
and other proprietary rights to this document, including all design, manufacturing,
reproduction, use, and sales rights thereto, except to the extent said rights are
expressly granted to others.

The NEC Computers product(s) discussed in this document are warranted in
accordance with the terms of the Warranty Statement accompanying each product.
However, actual performance of each such product is dependent upon factors such
as system configuration, customer data, and operator control. Since
implementation by customers of each product may vary, the suitability of specific
product configurations and applications must be determined by the customer and is
not warranted by NEC Computers.

To allow for design and specification improvements, the information in this
document is subject to change at any time, without notice. Reproduction
of this document or portions thereof without prior written approval of
NEC Computers is prohibited.

NEC, PowerMate, and MultiSync are registered trademarks and AccuSync is a trademark of

NEC Corporation or one of its subsidiaries. All are used under license.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of

Microsoft Corporation.

Intel, Pentium, and LANDesk are registered trademarks of Intel Corporation.

All other trademarks and registered trademarks are the property of their respective

trademark owners.

Summary of Contents for POWERMATE 2000 - 05-2001









































































































































Reviews: