NEC POWERMATE 2000 - 05-2001 Manual Download Page 65 | Manualshive

Page: 65 / 136

background image

3-30 Configuring the System

NEC INFO Center

The online NEC INFO Center provides quick access to information about
your system. The INFO Center includes the following modules.

Tour
Use Tour to find information about easy-to-use NEC Computers
printed and online documentation, software installation tools, and
many support services.

User’s Guide
Use this module to get quick access to an online version of your
printed user’s guide.

Questions
Look in this module to get answers to frequently asked questions
about your system.

Solutions
Go to this module to find solutions to common system problems.

Services
Check this module for a quick reference to the many NEC Computers
support services available to you.

To install the NEC INFO Center from the PowerMate Application and
Driver CD, follow the procedures in the previous section, “PowerMate
Application and Driver CD.” To start the NEC INFO Center, double click
the

NEC INFO Center

icon on your desktop. The INFO Center opening

screen appears (see the following figure).

Click on an NEC INFO Center module of your choice, depending on the
information you want to see. We suggest you start with the Tour module.

«
...
63
64
65
66
67
...
»

Summary of Contents for POWERMATE 2000 - 05-2001









































































































































Reviews:

No comments

Related manuals for POWERMATE 2000 - 05-2001

EES-5718 Series

Brand: Evalue Technology Pages: 16

Wind-Surfer 44162

Brand: Balt Pages: 4

Brand: IBM Pages: 194

d260 - Microtower Desktop PC

Brand: Compaq Pages: 1

Brand: Lobo Drives Pages: 40

Brand: Ergotron Pages: 12

Brand: Germfree Pages: 53

IBOX3588 Edge AI

Brand: Vantron Pages: 53

Brand: DFI Pages: 49

Brand: Shuttle Pages: 65

Brand: Wincor Nixdorf Pages: 33

Brand: New Horizons Pages: 5

ARS-P3800 Series

Brand: Advantech Pages: 42

Brand: ADE Pages: 64

Brand: Nexcom Pages: 59

NISE 107 Series

Brand: Nexcom Pages: 73

NIFE 105 Series

Brand: Nexcom Pages: 77

Brand: Nexcom Pages: 87

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands