118
4. LCD Menu
This chapter describes the menus displayed in the LCD screen on the projector’s control panel and their functions. For basic opera-
tions of menus, refer to the projector’s operation manual.
4-1. List of Menu
Menus in parentheses are menus for our service personnel. Normally, these menus cannot be used.
Main menu
Submenu
Description
Reference
page
Title Select
“Title Memory Name”
Selects the title of the signal to be projected.
TEST Pattern
Selects the test pattern to be projected.
Configuration
Light Setup
Adjust
Adjusts light source brightness.
Lens Control
Lens Position
Adjusts the position of the projected screen.
Focus Zoom
Adjusts the size and focus of the projected screen.
Reset
(FactoryDefault)
Returns the settings to their default values. Selects between preset
buttons and titles only, LAN settings only and all settings.
Filter Cleaning
Initializes the air filter usage time (for confirming the filter cleaning
time).
(Fan Usage)
Initializes the usage time of the fan.
(Light Usage)
Initializes the usage time of the light source.
(Phosphor)
Initializes the usage time of the Phosphor.
(Diffuser)
Initializes the usage time of the Diffuser.
(Pump)
Resets the pump usage time.
(Douser Count)
Resets the number of times the douser has been used.
(Setup)
Douser Setup
Sets the douser open/close state.
Panel Key Lock
Locks the buttons on the projector’s control panel so that they
cannot be operated.
Auto Key Lock
Enables or disables Auto Key Lock.
3D Reference
Sets the input terminal for 3D video system.
Off Timer
Sets the time until the projector power is turned off automatically.
Message
Sets the time to display the message indicating the air filter cleaning
cycle.
Silent Mode
Sets whether the rear (SYSTEM/LIGHT) status indicator, buzzer,
indicators on the projector’s control panel, illumination, and
LCD screen backlight are enabled or disabled.
Installation
(Note)
(Option Slot)
Configures the device installed in slot (only when the projector is in
standby mode).
(Orientation)
Sets the projection method and cooling fan operating mode.
Lens Type (Note)
Sets the type of lens (supports or does not support the lens
memory function) attached to the projector.
Lens Calibrate
(Note)
Performs calibration on lens that support the lens memory function
(only when the projector power is turned on).
Lens Center (Note)
Moves the lens shift position to the center (only when the projector
power is turned on).
(Baudrate)
Sets the PC control terminal (RS-232) data transmission speed
(bps).
(Date/Time)
Sets the date and time on the projector.
(Fan Speed Mode)
Sets the cooling fan operating mode.
(Service)
Displays the Service man Menu.
(Memory)
Light
The content of the selected light memory (light output power value)
can be overwritten with the current settings.
Lens
The content of the selected lens memory can be overwritten with
the current settings.
(Title Setup)
Preset Button
Preset Button 1–16
Sets the title to be assigned to the preset buttons (<1> to <10>
buttons).
Summary of Contents for NP-02HD
