NEC NP-02HD, Installation Manual

Page: 134 / 150

134
LCD Menu
4-4. Title Setup
This menu is the service personnel menu. For the using service personnel menu, refer to “4-1-1. When You Use the Service Person-
nel Menu” (page
121 ).
4-4-1. Preset Button
Use this button to set the titles to be assigned to the preset buttons (<1> to <8> buttons).
You cannot assign the same title to several preset buttons. If you want to assign any title to another number, cancel the assignment
once and then set it to any button again.
The “Preset Button 1 to Preset Button 8” settings correspond to buttons <1> to <8> on the control panel. To select the titles allo-
cated to “Preset Button 9 to Preset Button 16”, press the <1> to <8> button while holding down the <Up> button on the control
panel.
← Select the preset button number (1 to 16).
← Display the selected number of the title.
← Select the titles to be assigned to the preset buttons.
Select the titles from those registered in advance.
To clear assignment to preset buttons, select “---”.