NEC NP-02HD, Installation Manual

Page: 120 / 150

120
LCD Menu
Other menu functions
[LAN Reset to Manual IP]
Change the projector IP address assignment setting to “Manual”.
Press the MENU and EXIT buttons simultaneously for three seconds. When the following screen appears, press the ENTER button
for execution.
←
Pressing the ENTER button executes this function.
[Save PJ Log]
Save a log of the projector into a USB flash drive. Press the UP and ENTER buttons simultaneously. When the following screen
appears, specify the duration of the log to save using the LEFT/RIGHT buttons. Pressing the ENTER button displays the duration
of the log to save. Check the duration and press the ENTER button to save the log into the USB flash drive. The log is saved into a
file with the following name on the USB flash drive:
<projector-model-name> + <projector-serial-number> + <saving-date (year/month/day)>.txt
Example: Save PJ Log was executed on May 17, 2019, with a serial number of 012345:
NP-02HD_012345_20190507.txt
←
Use the LEFT/RIGHT buttons to specify the duration of the log to save.
[Over Drive]
Switch to the Over Drive mode which allows you to turn on the light at higher power output than normal.
Press and hold the LIGHT button for 5 seconds. When the following screen appears, press the ENTER button to switch the modes.
If the function is used, the light source may not be able to maintain stable brightness.
If you wish to use the function, consult your dealer.
← Pressing the ENTER button executes this function.