NEC NP-02HD, Installation Manual

Page: 128 / 150

128
LCD Menu
Silent Mode
Sets whether the rear (SYSTEM/LIGHT) status indicator, buzzer, indicators on the projector’s control panel, illumination, and LCD
screen backlight are enabled or disabled.
← Selects the item.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Rear LED Sets whether to use or not use the rear (SYSTEM/LIGHT) status indicator.
Enable: Use
Disable: Not use (the rear (SYSTEM/LIGHT) status indicator does not light up)
Buzzer Sets whether to use or not use the buzzer.
Enable: Use
Disable: Not use (the buzzer does not sound)
Control Button Sets whether to use or not use the indicators on the projector’s control panel.
Enable: Use
Disable: Not use (the LED next to the buttons do not light up)
LCD-Backlight Sets whether to use or not use the illumination and LCD screen backlight on the projector’s control panel.
Enable: Use
Disable: Not use (turns off the illumination and LCD screen backlight on the projector’s control panel)
TIP
When LCD Backlight is set to Disable, you can change the setting to Enable by long-pressing (3 seconds or more)
the EXIT button and UP button.
4-3-5. Installation
This menu is the service personnel menu. For the using service personnel menu, refer to “4-1-1. When You Use the Service Person-
nel Menu” (page
121 ).
Option Slot
Configures the devices mounted in slot. This menu is active in standby mode only.
←
Displays the currently selected item with asterisk (*).
←
Displays the setting.
IMB Media block (NP-90MS01/NP-90MS02)
No Board No device mounted
Orientation
Set the projection method (Image Orient) to match the installation conditions of the projector and screen. Furthermore, set the cool-
ing fan operation (Fan Tilt Setting) to match the installation conditions of the projector.
←
Displays the currently selected item with asterisk (*).
←
Displays the setting.
Normal-F Front projection. With the projector installed on the pedestal, projection is executed from the front of the screen.
Normal-R Rear projection. With the projector installed on the pedestal, projection is executed from the back of the screen.
UpsideDown-F Ceiling front projection. With the projector installed on the ceiling, projection is executed from the front of the screen.
UpsideDown-R Ceiling rear projection. With the projector installed on the ceiling, projection is executed from the back of the screen.