![background image](http://html.mh-extra.com/html/nec/neccare-platinum-express5800-a1160/neccare-platinum-express5800-a1160_installation-manual_251387064.webp)
Checking
and Updating Management firmware Level and the BIOS Level
5-12
Figure 5-10 Management Firmware Revision Status
5.4.6.
Updating BIOS on the EFI Flash Memory
When you update the BIOS firmware (EFI) on the flash memory, operating system
settings are set to default values. If you need different values for certain BIOS settings,
you must change these settings after completing the update. Refer to
User’s Guide
for
the BIOS default values for operating systems.
To update the BIOS firmware (EFI) when the partition is powered off
1. Prepare a USB drive, as follows:
a. Format the USB drive as FAT32.
b. Copy the BIOS update package to the USB drive with the following path name:
(USB drive root):¥efi¥update¥UPDATEX64.efi
2. Insert the USB drive in one of the host USB ports on the boot cell.
3. Click
Power Up/Down
on the summary page of the remote console interface.
During the boot process, the logo screen appears twice. The second time, a
command to press the spacebar to enter the BIOS menu appears at the bottom.
4. Press the spacebar when the command appears on the second logo screen.
The BIOS front page appears, as shown in
Figure 5-11
.
Summary of Contents for NECCare Platinum Express5800/A1160
