Cell Components
1-5
Component Description
LED status indicators
Provides status for the cell. The top light indicates power
status. The bottom light indicates cell status. See the
EXPRESSSCOPE® Monitor LCD or the remote console
interface for additional information on the power or cell status.
DVD-RW drive
A DVD-RW drive for your use.
Partition USB connections
Provides two universal serial bus (USB) 2.0 ports.
1.7.2.
Components on the Rear of a Cell
Figure 1-3
identifies the components that are visible on the rear of the cell.
Table 1-3
describes these components in more detail.
Figure 1-3 Rear of the Cell
Table 1-3 Components on the Rear of a Cell
Component Description
PCIe carrier/cards
Six hot-plug switched PCIe 8x card slots. Slots 1 and 4 can
support full-length cards. Each PCIe card is housed in an
individual carrier.
Cell ID
An LED that is lit when the ID button on the
EXPRESSSCOPE® Monitor is pressed. Press the cell ID
button on the rear of the cell to turn off the light.
Partition USB ports
Two universal serial bus (USB) 2.0 ports.
Summary of Contents for NECCare Platinum Express5800/A1160
