Apply AC Power Initially
5-5
Figure 5-4 Cell Power Cord
5.3.2.
System Operating at 200 to 240 VAC
To apply AC power to a 200 to 240 VAC system, perform the following procedure:
1. Verify the power strips are set to the off position.
2. Plug the power strip power cord into the premises wiring (for example, the floor or
wall receptacles or the UPS receptacles).
Figure 5-5
shows the power strip power
cord.
Summary of Contents for NECCare Platinum Express5800/A1160
