NEC NEC Express5800 Series, Online Service Manual

Page: 52 / 198

Configuring Your System 3-19
Changing the Adapter and Device Configurations
The SCSI Configuration Utility Main Menu lists the onboard SCSI adapter and shows its current
settings. The adapter controls the operation of the SCSI devices in your system (hard disk drives or
removable media devices).
1.
Select “Adapter Setup” and press
ENTER
. The Adapter Setup screen displays.
Adapter Setup Screen
Description Recommended Setting or Display
Only Your Configuration
SCAM Support On
Parity On
Host SCSI ID 7
Scan Order Low to High
Removable media support None
CHS Mapping SCSI Plug and Play Mapping
2.
Highlight the function you want to change and press
ENTER
. You will be prompted to save
changes when you exit the configuration utility.
To change device configuration parameters, perform the following steps:
1. At the SCSI Configuration Utility Main Menu, select “Device Selections” and press
ENTER
.
The Devices 0 to 7 screen displays.
2.
Select the SCSI device you are reconfiguring and press
ENTER
. If you are configuring SCSI
Hard Disk Drives, refer to the "SCSI Hard Disk Drives" Table below; if you are configuring
SCSI Removable Media Devices, refer to the "SCSI Removable Media Devices" Table below for
recommended settings.