NEC NEC Express5800 Series, Online Service Manual

Page: 51 / 198

3-18 Configuring Your System
Symbios Configuration Utility
The Symbios Configuration Utility detects the SCSI host adapter located on the system board. Use
the utility to:
n
Change adapter and SCSI device default values
n Check and/or change SCSI device settings that may conflict with those of other devices in the
server.
n
Perform low-level formatting or verify operations on SCSI disk drives.
Running the Symbios Configuration Utility
1. Power-on the system. The system boots up.
2.
When this message appears on the video monitor:
Press Ctrl-C to start the Symbios Configuration Utility
Press
Ctrl+C
to run this utility.
3.
The utility starts and the Main Menu displays.
Symbios Configuration Utility Main Menu
Status Adapter Port Number IRQ Level
Current Next Boot
NVRAM Found
SYM53C875 F800 11 On On* Yes
Change Adapter Status – Press ENTER twice to change adapter Next Boot Status.
Adapter Boot Order – Press ENTER to select and change boot order of each SCSI adapter.
Additional Adapter Configuration – Not used.
Display Mode-Verbose – Press ENTER to change display mode.
Mono/Color – Press ENTER to change display from black/white to color.
Language
Help
Quit
*Next Boot Status for this controller must be turned
OFF
if you install the optional Mylex AcceleRAID 250 Controller
board in your system. Refer to “Change Adapter Status” above.
The following keys are active for all SCSI Configuration screens:
Key Action
Arrows Up and down arrows move from one parameter to another within a screen.
ENTER Displays options for a configurable parameter. Selects an option.
ESC Moves back to previous screen or parameter or EXIT if at the Main menu.