1. Installing Internal Optional Devices
Express5800/R120d-2E User’s Guide
86
Chapter 2 Preparations
10. Start the BIOS Configuration utility on the mounted board to set up the board.
Availability or startup and operation procedure of the utility depends on board. For details, refer to the
manual that comes with the board. If a PCI card including RAID Controller, SCSI controller, and LAN
card which connects to any bootable device is added, the boot priority might be changed to the default
setting. In that case, configure the boot priority in the
Boot
menu of the BIOS Setup utility. For details
about the
Boot
menu, refer to
Chapter 2 (1.2.5 Boot)
in "
Maintenance Guide
".
(2) When using the optional controller (N8103-160)
For details, refer to the manual that comes with optional RAID Controller (N8103-160).
Important
•
You must avoid static electricity to work with the procedure below. For
details, refer to
Chapter 2 (1.2 Anti-static Measures)
.
•
Do not change the mode to hibernate when building a RAID System.
Note
•
When installing an optional RAID Controller, start the BIOS Setup utility, select
PCI Configuration
from the
Advanced
menu, and then make sure that the
parameter of
PCI Slot
xx
ROM
(
xx
is PCI slot number) is set to
Enabled
.
•
When connecting a RAID Controller, set the boot priority to 8th or higher in the
Boot menu of the BIOS Setup utility. If the setting is 9th or lower, the
configuration menu for RAID Controllers cannot be launched.
1.13.4
Removal
To remove a riser card, reverse the installation procedure. Hold the card firmly and remove it. When
removing it, have another person hold the server so that the server does not move.
If needed, run SETUP utility, and then specify the boot order from the
Boot
menu. For details about the
Boot
menu, refer to
Chapter 2 (1. System BIOS)
in "
Maintenance Guide
".
If using the server while the card is removed, attach the slot cover that comes with the riser card.
