1. Installing Internal Optional Devices
Express5800/R120d-2E User’s Guide
57
Chapter 2 Preparations
1.6
Removing Top Cover
You need to remove top cover when installing or removing the following component:
Internal flash memory, TPM Kit
Processor, DIMM
Extra battery for RAID controller, Back up file device
PCI card, Additional HDD cage
Additional HDD cage(rear), Additional/redundant fan unit
Optical disk drive
Important Before removing the top cover, be sure to disconnect cables from PCI card such as
LAN adapter. If not, cables may be damaged.
1.
Refer to steps 1 to 4 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2.
Slide the top cover toward the front of the server while pressing the lock button on the cover.
3.
Lift off the top cover (front) from the server.
4.
Loosen the thumb nut on rear of the server, and slide the top cover (rear) to rear side.
