NEC NEC Express5800/R120d-2E User Manual Download Page 76

Page: 76 / 160

1. Installing Internal Optional Devices

Express5800/R120d-2E User’s Guide

Chapter 2 Preparations

Insert the backup file device into the cage.

Secure the backup file device with the screws
provided with the backup file device.

Note

•

Be sure to use the screws provided with the server.

•

Position the backup file device so that the device screw holes align with the

screw holes in the device carrier.

•

If you feel difficult to connect the cable of the long device, slide the device

to the front and then connect the cable.

Insert the device carrier into the backup file
device bay.

Since power cable is not yet connected, insert
the device carrier halfway.

Connect the power cable and interface cable to
the backup file device.

Connect the power cable provided with the
server and separately-priced USB cable
(K410-194/195(00)) to the backup file device.

USB cable

Power cable

Summary of Contents for NEC Express5800/R120d-2E

































































































































































Search results

Summary of Contents for NEC Express5800/R120d-2E

Reviews:

Related manuals for NEC Express5800/R120d-2E

Brands by name

Popular brands

NEC NEC Express5800/R120d-2E, User Manual

Search results

Summary of Contents for NEC Express5800/R120d-2E

Reviews:

Related manuals for NEC Express5800/R120d-2E

Brands by name

Popular brands