CHAPTER 3 SYSTEM DATA PROGRAMMING
– 124 –
ND-71503(E) Rev.5.0
9pch3001.fm
DESCRIPTION
DATA
Assign the FP number to the FP (Virtual FP/FP
card/MP built-in FP) or AP number to the AP
(Virtual IPT).
NOTE 1:
To control the D
term
IP, assign the
second data “00” to the FP number
of Virtual FP.
NOTE 2:
To control the IP-PAD, assign the
second data “00” to the FP number
of FP card/MP built-in FP.
NOTE 3:
To control the Virtual IPT, assign the
second data “38” to the AP number
of Virtual IPT
NOTE 4:
Two Virtual AP numbers for the vir-
tual IPT can be set to the system.
•
(1)
(2)
(1)
(2)
Y=0
00-59: FP No.
00
: FP (Virtual FP/FP card/MP built-
in FP)
NONE : No data
04-15, 20-59: AP No.
38
: Virtual IPT
NONE : No data
Assign the Physical PIM/Virtual PIM number
controlled by the FP or the Virtual PIM num-
ber that accommodates the Virtual IPT to the
FP/AP number assigned by CM05 Y=0.
NOTE 1:
We recommend the setting of PIM
number by CM05 Y=8, when using
Series 3200 R6.2 software or later.
NOTE 2:
For Virtual IPT, set the Virtual PIM
number 12, 13 to the Virtual AP
number.
After setting the Virtual PIM number
12, set the number 13, if required.
•
(1)
(2)
Y=4
00-59: FP/AP No.
00-15
: Physical PIM/Virtual PIM No.
NONE : See
.
START
CM05
INITIAL
INITIAL
A
JANUARY/16/2004
SYSTEM CONSTITUTION DATA ASSIGNMENT
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
