NEC NEAX2000 IPS, System Manual

Page: 126 / 380

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 114 –
ND-71503(E) Rev.5.0
9pch3001.fm
(2) Remote Site Constitution Data Assignment
DESCRIPTION DATA
Assign the FP number to the FP (Virtual FP/
MP built-in FP), or AP number to the AP card.
NOTE 1:
To control a D
term
IP, assign the sec-
ond data “00” to the FP number of
Virtual FP.
NOTE 2:
To control an IP-PAD, assign the
second data “00” to the FP number
of MP built-in FP.
•
(1)
(2)
Y=0
00-59: FP No.
00
: FP (Virtual FP/MP built-in FP)
NONE : No data
Assign the remote site number that the FP/AP
is accommodated and the Physical PIM/Virtual
PIM number controlled by the FP.
NOTE: Set the remote site number assigned
by CM0B Y=00>90.
[For Series 3200 R6.2 software or Series
3300 software]
•
(1)
(2)
Y=8
00-59: FP/AP No.
XX ZZ/ZZZZ (Site No. + PIM No.)
XX
: 01-30: Remote Site No.
ZZ : 00-15, 99: Physical PIM No./
Virtual PIM No.
ZZZZ : 0001/0203/0405/0607: PIM No.
for 2 PIMs designation
NONE : See “System Data Memory All
Clear” . Page 83
[For Series 3400 software or later]
•
(1)
(2)
Y=8
00-59: FP/AP No.
XX ZZ/ZZZZ (Site No. + PIM No.)
XX
: 01-30: Remote Site No.
ZZ : 00-15, 99: Physical PIM No./
Virtual PIM No.
ZZZZ : 0001-1415: PIM No.00-14
(smaller number) + PIM No.01-
15 (larger number)
NONE : See “System Data Memory All
Clear” . Page 83
START
CM05
INITIAL
INITIAL
A
SEPTEMBER/15/2004
REMOTE PIM OVER IP DATA ASSIGNMENT
CÔNG TY VIỄN THÔNG VIỆT PRO Chuyên phân phối tổng đài NEC http://vietpro.com.vn