NEC NEASCOT-P65 User Manual Download Page 108

Page: 108 / 317

CHAPTER 3 FUNCTIONAL OUTLINE

PRELIMINARY

NEC confidential and Proprietary

108

(2) Monitoring receive trace message

(a) Detecting J0 Section Trace Identifier Unstable (Section TIU)

Whether the 16- or 64-byte section trace message stored in the J0 byte is received stably is checked. If the

receive message differs from the previous message, the internal counter is incremented (+1). When the

value of the counter reaches eight or five (set to the STIUD bit of the MDSOHR register), the status is

indicated as Section TIU. This status is cleared if three or five (set to the STIUT bit of the MDSOHR register)

messages of the same contents have been received in succession. At the same time, the internal counter is

also reset.

(b) Detecting J0 Section Trace Identifier Mismatch (Section TIM)

Whether the 16- or 64-byte section trace message stored in the J0 byte is the expected message is checked.

If the message stored to the J0 message buffer differs from the expected message (set the expected

massage to Expected buffer), the

PD98413 detects the Path TIM. The detection and termination

conditions are as follows.

Detection: If the mPD98413 received same J0 massage three or five times (set to the STIMDT bit of the

MDSOHR register) continuously, and that message is differ from expected massage..

Termination: If the mPD98413 received same J0 massage three or five times (set to the STIMDT bit of the

MDSOHR register) continuously, and that message equal to expected massage.

When the

PD98413 detects the Section TIM, the status is indicated as the Section TIM in the DSLER

(c) Detecting J1 Path Trace Identifier Unstable (Path TIU)

Whether the 16- or 64-byte section trace message stored in the J1 byte is received stably is checked. If the

message stored to the J1 message buffer differs from the previous message, the internal counter is

incremented (+1). When the value of the counter reaches five or eight (set to the PTIUD bit of the MDPOHR

MDPOHR register) messages having the same contents are received in succession. At the same time, the

internal counter is also reset.

(d) Detecting J1 Path Trace Identifier Mismatch (Path TIM)

Whether the 16- or 64-byte section trace message stored in the J1 byte is the expected message is checked.

If the message stored to the J1 message buffer differs from the expected message, the

PD98413 detects

the Path TIM. The detection and termination conditions are as follows.

Detection: If the mPD98413 received same J1 massage three or five times (set to the PTIMDT bit of the

MDPOHR register) continuously, and that message is differ from expected massage..

Termination: If the mPD98413 received same J1 massage three or five times (set to the PTIMDT bit of the

MDPOHR register) continuously, and that message equal to expected massage.

When the

PD98413 detects the Path TIM, the status is indicated as J1 Path TIM in the DPPER register.

Summary of Contents for NEASCOT-P65






























































































































































































































































































































Search results

Summary of Contents for NEASCOT-P65

Reviews:

Related manuals for NEASCOT-P65

Brands by name

Popular brands

NEC NEASCOT-P65, User Manual

Search results

Summary of Contents for NEASCOT-P65

Reviews:

Related manuals for NEASCOT-P65

Brands by name

Popular brands