![background image](http://html.mh-extra.com/html/nec/n8803-040a/n8803-040a_user-manual_247556057.webp)
3.
Select [Advanced] tab – [PCI Configuration] – [PCI Device Controller and Option ROM Settings] in
BIOS Setup utility.
4.
Set [PCI
#
Slot Option ROM] to [Enabled].
[PCI
#
] is PCI slot number where Fibre Channel board is installed
5.
Select “Save Changes and Exit” in the “Save & Exit” tab to save changes and reboot the computer.
6.
After reboot the computer, press <Ctrl> and <Q> keys or <Alt> and <Q> keys while the following
message is displayed.
When a key pressed right, the following message is displayed.