4-1. Selection and Installation of Bracket
A low-profile bracket is installed on this product. When fixing this product to a PCI slot optimized for
the standard profile type, replace the bracket with the attached standard one. The procedure is as
follows.
Exchange of a bracket uses the screwdriver suitable for the size of a screw.
1.
Remove the SFP+ module temporarily.
Remove the dust cover and pull down the lever of the SFP+ module to release the
lock, and then pull the SFP+ module out to remove.
2.
Remove the two screws fixing the bracket and remove from this product.
7LSV
7LSV
ղ
ձ
ղ
ձ
