![background image](http://html.mh-extra.com/html/nec/n8803-040a/n8803-040a_user-manual_247556047.webp)
4-2. Install the Card
Install this product in the computer following the steps described on the next step
1.
Check the power to the computer is off (System POWER LED off), and then unplug the power
code from the electrical outlet.
If the power to the computer is on (System POWER LED on), shut down the
operating system and then turn off the computer.
2.
Disconnect other cables connected to behind of each CPU/IO module in the computer.
3.
Remove the front bezel from the computer.
4.
Remove the top cover and other components in CPU/IO module if necessary following the
instructions in the maintenance guide of the computer.
5.
Remove the SFP+ module from this Fibre channel board temporarily.
Remove dust cover and pull down the lever of SFP+ module to release the lock,
and then pull the SFP+ module out to remove.
7LSV
ղ
ձ