Appendix. Check the WWPN
This appendix describes procedure to check the WWPN(Worldwide port name) of this product installed into
the computer.
UEFI Boot
If the Boot Mode setting of the computer is “UEFI”, follow the instructions below to check the WWPN.
1.
After checking this product is properly installed into the computer, turn on the computer.
2.
Press <F2> key while the following message is displayed. BIOS Setup utility (SETUP) will start after
POST.
If the above menu is not displayed and the window has gone to the next one, press
<Alt>, <Ctrl>and<Del> keys simultaneously to reboot the computer. Then, start the
steps from the beginning.
The above message sample is just for your reference. Some of them may be
different depending on the computer or its configurations.
7LSV
