4. Setup
Please follow the steps described below to set up this product.
Do not handle this product during an electrical storm.
When installing this product in the computer, please read the user's manual of the computer and
unplug the power plug from the electrical outlet. Do not insert or remove the power plug with wet
hands. Doing so can lead to faults or electric shock.
Do not pull on the lead when unplugging the power plug from the electrical outlet. Doing so can
damage the power cord and lead to shorting or electric shock.
Avoid installation in extreme temperature conditions.
Immediately after the computer is powered off, its internal components such as hard
disks are very hot. Leave the computer until its internal components fully cool down
before installing/removing any component.
Connect firmly.
Please connect the product to the computer firmly. A loose connection can cause a
contact failure and can lead to smoke or fire.
Explained in this User’s Guide
Selection and Installation of Bracket
2CIG
Selection of bracket to use for this product.
Install the card
2CIG
Install this product in the computer.
Connect Fibre Channel Devices
2CIG
Connect Fibre Channel Devices to this product.
Install the driver
See the Maintenance Guide attached
with the server
Install the driver for your operating system.
