![background image](http://html.mh-extra.com/html/nec/n8803-040a/n8803-040a_user-manual_247556053.webp)
3.
Select [Advanced] tab – [PCI Configuration] – [PCI Device Controller and Option ROM Settings] in
BIOS Setup utility.
4.
Set [PCI
#
Slot Option ROM] to [Enabled].
[PCI
#
] is PCI slot number where Fibre Channel board is installed
5.
Select “Save Changes and Exit” in the “Save & Exit” tab to save changes and reboot the computer.
6.
After reboot the computer, start up the BIOS SETUP utility again.
7.
Select “UEFI Driver Configuration” in the “Advanced” tab.