NEC N8800-149F, User Manual

Page: 77 / 226

ESX Operation and Configuration 3-11
4.
Restart the PCI module.
If the PCI Module 0 was stopped in the step 3, execute the following command and the
PCI module will be started.
# cd /opt/ft/bin
# ./ftsmaint bringup 10
Once the PCI module is started, PCI module diagnosis, mirror volume duplication and
PCI module duplication are performed.
The PCI modules’ status LEDs changes as shown below:
[Indications of status LEDs]
Immediately after the PCI module startup until the completion of diagnosis:
LED Secondary * Primary *
1 PRIMARY LED - Green
2 DISK ACCESS LED -
Amber or Green blinking
(Green when accessing to HDD)
LED System
3 System FT LED
－
When duplication of disks is started after the completion of PCI module diagnosis:
LED Secondary * Primary *
1 PRIMARY LED - Green
2 DISK ACCESS LED
Amber or Green blinking
(Green when accessing to HDD)
Amber or Green blinking
(Green when accessing to HDD)
LED System
3 System FT LED
－
After the completion of disk duplication and when the PCI modules are duplicated:
LED Secondary * Primary *
1 PRIMARY LED - Green
2 DISK ACCESS LED Green Green
LED System
3 System FT LED Green