NEC N8800-149F, User Manual

Page: 71 / 226

ESX Operation and Configuration 3-5
Replacing a hard disk drive
To replace a failing hard disk, follow the steps below. Replace a hard disk when the CPU/IO module
0 and 1 are powered on.
Determining a failing disk
This section provides information on how to determine a failing hard disk drive.
IMPORTANT:
This must be operated by root user.
1. Execute “mpmadm -l”commands.
2. Check the failed disk form the displayed info.
The following is an example when a failure occurred on the internal disk stored in the slot 0 of PCI
module 1.
# cd /opt/ft/sbin/
# ./mpmadm -l
mpm0 [2/2]
|_ vmhba110500:C0:T0:L0 [ faulty ]
|_ vmhba100500:C0:T0:L0 [ in_sync ]
When you confirm the slot0 of PCI Module1 by “/opt/ft/bin/ftsmaint ls” command,
i
t is displayed as
follows.
# cd /opt/ft/bin/
# ./ftsmaint ls 11/40/1
H/W Path : 11/40/1
Description : Disk Drive
State : BROKEN
Op State : SHOT
Reason : NONE
････ ････
････ ････