NEC N8800-149F, User Manual

Page: 22 / 226

1-4 Precautions for Use
Use of Power Supply and Power Cord
WARNING
Do not handle a power plug with a wet hand.
Do not plug/unplug a power cord with a wet hand.
There is a risk of an electric shock.
Do not connect the ground wire to a gas pipe.
Never connect the ground wire to a gas pipe.
There is a risk of a gas explosion.
CAUTION
Do not plug the attached cord in a nonconforming outlet.
Use a wall outlet with specified voltage and power type.
There is a risk of a fire or electricity leakage if you use a nonconforming outlet.
Avoid installing the equipment where you may need an extension cord. If the
cord that does not meet the power specifications, there is a risk of overheating
that could lead to a fire.
Do not plug multiple cords in a single outlet.
If the rated current exceeds the rating, there is a risk of overheating that could
lead to a fire.
Do not plug the cord insecurely.
Insert the plug firmly into an outlet. There is a risk of heat or fire due to poor
contact when you insert the plug insecurely. If dust settles on the slots and it
absorbs moisture, there is also a risk of heat or fire.
Do not use nonconforming power cords.
Do not use any AC cord other than the enclosed one. There is a risk of fire
when the current exceeds the rating on the cord.
You also have to observe the following prohibitions about handling and
connecting interface cables.
„
Do not pull on the cord.
„
Do not pinch the cord.
„
Do not bend the cord.
„
Keep chemicals away from the cord.
„
Do not twist the cord.
„
Do not place any object on the cord.
„
Do not use cords as bundled.
„
Do not alter, modify, or repair the cord.
„
Do not staple the cord.
„
Do not use any damaged cord. (Replace it with a new one of the same
specifications. For replacement procedures, contact your sales agent.)