E-
19
7.2.
Network Cables
N8104-206/207
Connector RJ45
Type
Twisted Pair Cable( UTP / STP ) Must be 4pair wiring
Make sure you use cable that complies with the TIA-568 wiring
specification.
Cable Category
10BASE-T: Cat.3 or better,
100BASETX : Cat.5 or better
1000BASE-T Cat.5e or better
Length
100 m (max.)
Limitation of N8104-206/207
Refer to the left figure which does not get used to use for the cable with boots (with a connector cover).
* The cable with boots causes of poor contact and a connector breakage.
N8104-208
A “N8104-189 SFP+ module (10G-SR)” has an optical fiber interface based on IEEE802.3ae 10Gigabit
Ethernet® standard. The 10GbE SR standard enables 10GbE and full duplex transmissions at distances
up to 300 meters using standard multi-mode fiber (MMF, 850nm wave length) cabling.
Supported MMF cable listed below:
Connector type: LC
core/clad diameter
Modal bandwidth
Type
Cable length
50/125
μ
m 400MHz*km
OM-2
2
～
66 m
500MHz*km OM-2
2
～
82 m
2000MHz*km OM-3
2
～
300 m
62.5/125
μ
m 160MHz*km
OM-1
2
～
26 m
200MHz*km OM-1
2
～
33 m
OM: Optical Multimode
11.58
～
11.79mm
based on ISO standard.
The width of the root portion of a plug should
use the cable within 12mm.
less than12mm
cable boots
Summary of Contents for N8104-206
Page 49: ......
