E-
8
Introduction
Thank you very much for purchasing our products. To maximize the functionality of this product, please read this
guide carefully and follow the instructions for proper handling.
About this Guide
This guide describes how to handle and use this product properly.
Keep this guide at hand for your future reference.
Text Conventions
The following conventions are used throughout this guide. For safety symbols, see “Safety Indications” provided
earlier.
IMPORTANT:
Items that are mandatory or require attention when using this product
NOTE:
Helpful and convenient piece of information
1.
General Description
1.1.
Overview
This product is an Ethernet® LAN Adapter for Express 5800/R120i-1M and Express 5800/R120i-2M.
The Quad Port 1000BASE-T LOM Card has two or four RJ-45 interfaces with 10/100/1000Mbps speed. And you
can connect to the network 1Gbps(maximum) per port.
The Dual Port 10GBASE-T LOM Card has two RJ-45 interfaces corresponding to 100BASE-TX and
1000/10GBASE-T. And you can connect to the network 10Gbps (maximum) per port.
Dual Port 10/25GBASE SFP+ LOM Card has one or two optical transceiver module interfaces. And you can connect
a SFP + module for 10GBASE-SR, SFP28 module for 25GBASE-SR. In addition, you can connect a DA (direct
attached) cable.
IMPORTATANT:
-
Do not install this product to a computer that is not recommended by NEC
Corporation.
- Use
supported
optical modules
（
N8104-208
）
.
N8104-189 SFP+ Module(10G-SR)
N8104-190 SFP28 Module(25G-SR)
For the DA cable, NEC only verified.
Refer to “7.2.
Network Cables
”(page E-19) for the verified cable.
NOTE:
Check the slot which can be attached with reference to User’s Guide of Express
Server before attaching this product.
Summary of Contents for N8104-206
Page 49: ......
