39
2-6. Controller Configuration
[Main Menu]
で
<4>
キーを押すと以下の画面が表示されます。
この画面からエラー検出時の起動方法の設定、およびシステムリソースの確認を行うこと
ができます。
FastBuild (tm) Utility (c) xxxx-xxxx Promise Technology, Inc.
Halt On Error : Disable
[ Adapter Configuration - Options ]
[
←
,,Space] Change Option [ESC] Exit
[ Keys Available ]
Installed Memory Address : DEDF8000 Size : 64M
Controller IRQ : 10
ATA IO Address : D800
XOR and HDMA IO Address : D400
Sequence Control IO Address : D000
Flash and SRAM Memory Address : DEE00000
[ System Resources Configuration ]
[Halt On Error]
POST
中にエラーを検出した場合の起動方法を設定することができます。
Halt On Error
起動時の動作
Disable(
推奨値
)
故障した
HDD
を切り離し、クリティカル状態で起動しま
す。
Enable
起動処理を停止します。起動を継続させためには手動で
<Esc>
キーを押す必要があります。
Halt On Error
の設定手順
1.
[Main Menu]
から
<4>
キーを押して
[Controller Configuration]
を立ち上げます。
2.
設定値にカーソルを合わせて、
<Space>
キーまたは矢印キー『←』を押します。
3.
設定変更後、
<Esc>
キーで
[Main Menu]
に戻ってください。
設定変更後、
[Main Menu]
に戻らずに本体装置の電源を
OFF
した場合や、
<Ctrl>+<Alt>+<Del>
キーで再起動した場合は、設定変更が反映されません。