3. Standard Features
Express5800/T110f-S User’s Guide
31
Chapter 1 General Description
3.1
Management Features
The hardware components of the server provide operation control/reliability features as shown below.
Additionally,
NEC ESMPRO Agent
, which is provided in EXPRESSBUILDER, enables you to collectively
manage the state of your systems. You can also monitor the status of the server from a PC to manage the
network where NEC ESMPRO Manager provided in EXPRESSBUILDER is installed.
The features available on this server are as shown in the table below.
Function Availability
Description
Shows physical hardware information.
Memory bank
{
Shows physical memory information.
Device info
{
Shows information specific to the server.
Hardware
CPU
{
Shows physical CPU information.
System
{
Shows logical CPU information and monitors the load factor.
Shows logical memory information and monitors the status.
I/O device
{
Shows information on I/O devices ( serial ports, keyboard, mouse, and
video).
Temperature
{
Monitors the temperature inside of the chassis.
Fan
{
Monitors the fans.
Voltage
{
Monitors the voltage inside of the chassis.
Power supply
{
Monitors the power supply unit.
System
environment
Door
×
Monitors chassis intrusion (open/close of the covers and doors on the
chassis).
Software
{
Shows service, driver, and OS information.
Network
{
Shows network (LAN) information and monitors packets.
BIOS
{
Shows BIOS information.
Local polling
{
Monitors the values of an MIB item obtained by NEC ESMPRO Agent.
Storage
{
Monitors controllers and storage devices including hard disk drives.
File system
{
Shows the file system configuration and monitors the free space.
RAID system
{
Monitors the following RAID Controllers:
•
On-board RAID Controller (LSI Embedded MegaRAID
TM
)
•
Optional RAID Controller
{
Monitors OS stall using the Watch Dog Timer.
Others*
{
Performs alert processing after an OS STOP error occurs.
{
: Supported.
U
: Partially supported.
×
: Unsupported.
*: Not displayed on the NEC ESMPRO Manager screen.
Tips
NEC ESMPRO Manager and NEC ESMPRO Agent are supplied with the server as
standard. For how to install and use each software component, refer to the
explanation of the component.
