1. Installing Internal Optional Devices
Express5800/T110f-S User’s Guide
81
Chapter 2 Preparations
Install a 2.5-inch HDD cage in the server by using the following procedure.
1. See
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2.
To remove the side cover and the front bezel, see
Chapter 2 (1.4 Removing the Side Cover
and
1.5
Removing the Front Bezel)
.
3.
Set the jumper for the backplane board installed in
the HDD cage. The jumper setting when the
onboard SATA controller (LSI Embedded
MegaRAID) is used differs from that when the
optional RAID controller is used. For details, see
Chapter 2 (1.9 Use of Internal Hard Disk Drives in
the RAID System)
.
4.
Mount the rollers that come with the HDD cage on
the holes inside the HDD bay (10 places).
5.
Insert the HDD cage into the HDD bay. The "C side"
must face upward. Do not push the HDD cage to the
end for connecting cables later.