2. Installation and Connection
Express5800/T110f-S User’s Guide
107
Chapter 2 Preparations
2.2.2
Power cord
Connect the provided power cord to the server.
When the power cord is connected to an outlet, POWER LED lights amber during initialization of the
system.
Tips
•
To connect the power cord to a UPS, connect it to the outlet provided at the rear
of the UPS. For details, refer to the instruction manual supplied with the UPS
•
In order to link the power supply from the UPS with the power-on/off of this
server, the BIOS settings change are required depending on the UPS to which
the power cord of this server is connected.
In the BIOS Setup Utility, select
Server
, and then
AC-LINK
to change the
parameter to the appropriate value.