1. System BIOS
Express5800/R120d-1E, R120d-2E Maintenance Guide
77
Chapter 2 Convenient Features
For details about the options, see the table below.
Option Parameter
Descriptions
Serial Port A Settings
−
−
Serial Port A
Disabled
[Enabled]
Enable or disable serial Port A
Serial A Base I/O
[3F8h]
2F8h
3E8h
2E8h
Specify the base I/O address for serial port A.
Serial A Interrupt
[IRQ 4]
IRQ 3
Specify the interrupt for serial port A
Serial Port B Settings
−
−
Serial Port B
Disabled
[Enabled]
Enable or disable serial Port B
Serial B Base I/O
3F8h
[2F8h]
3E8h
2E8h
Specify the base I/O address for serial port B
Serial B Interrupt
IRQ 4
[IRQ 3]
Specify the interrupt for serial port B
Console Redirection Settings
−
−
BIOS Redirection Port
[Disabled]
Serial Port A
Serial Port B
Enable or disable the console redirection
feature for the specified serial port. Specifying
[Serial Port A] or [Serial Port B] allows direct
connection via terminal unit such as NEC
ESMPRO Manager, and options for
connection shown below are displayed.
Terminal Type
[VT100+]
VT-UTF8
PC-ANSI
Select the terminal type.
Baud Rate
9600
19200
57600
[115200]
Specify baud rate.
Data Bits
7
[8]
Specify the data bit width
Parity
[None]
Even
Odd
Specify parity type.
Stop Bits
[1]
2
Specify stop bits
Flow Control
None
[Hardware RTS/CTS]
Specify the flow control method.
Continue C.R. after POST
Disabled
[Enabled]
Enable or disable the feature to continue
console redirection after completion of POST.
[ ]: Factory setting