5. Details of EXPRESSBUILDER
Express5800/R120d-1E, R120d-2E Maintenance Guide
118
Chapter 2 Convenient Features
5.4
Configure EXPRESSBUILDER Settings
EXPRESSBUILDER Settings can be configured from Top Menu (described in
Chapter 2 (5.2 Menu) - (2) Top
Menu
), as follows.
(1) Load a driver into EXPRESSBUILDER
A driver stored in removable media can be loaded.
Use this function only for drivers provided by NEC
.
(2) Manage Internal Flash Memory
Internal Flash Memory can be managed by using commands described below.
Note
The below commands are not available when EXPRESSBUILDER is started from
Internal Flash Memory.
a) Confirm the connection of Internal Flash Memory
Checks if Internal Flash Memory is installed and accessible.
POST message is changed
depending on the execution result of this command.
If the connection of Internal Flash Memory is recognized, the commands
b)
and
c)
below can be executed.
Connected:
EXPERSSBUILDER can be started by pressing <F3> key (
<F3> Internal Flash Memory
is displayed on the screen).
Not connected: EXPERSSBUILDER cannot be started by pressing <F3> key (
<F3> Internal Flash
Memory
is not displayed on the screen).
b) Initialize Internal Flash Memory
Clears the data in Internal Flash Memory and initializes (formats) it.
Be careful that
all data in Internal Flash Memory is deleted
.
c) Update Internal Flash Memory
Copies EXPRESSBUILDER from EXPRESSBUILDER DVD or other media provided by NEC to Internal
Flash Memory.
The data is overwritten and
all previous data is cleared
.
Tips
The parameter file and RAID configuration data are retained.