5. Details of EXPRESSBUILDER
Express5800/R120d-1E, R120d-2E Maintenance Guide
113
Chapter 2 Convenient Features
5.
Details of EXPRESSBUILDER
EXPRESSBUILDER helps you to install Windows and check the server. Bundled software and documents are
provided in EXPRESSBUILDER.
5.1
Storage Media
EXPRESSBUILDER can be operated from the following two ways.
Tips
Remove other removable media before starting EXPRESSBUILDER.
DVD:
EXPRESSBUILDER DVD is supplied as standard. This is used in the following two ways:
(1) Insert the DVD to the optical disk drive of the server, and then reboot by turning off and on the server or
by pressing <Ctrl> + <Alt> + <Delete> keys.
Boot Selection Menu shown in
Chapter 2 (5.2 Menu) - (1) Boot Selection Menu
appears.
(2) Insert the DVD into a computer on which Windows is running.
Autorun Menu shown in
Chapter 2 (5.2 Menu) - (4) Autorun Menu
appears.
Internal Flash Memory (optional):
If Internal Flash Memory is installed in the server, EXPRESSBUILDER can be started from it.
Note
It is necessary to copy EXPRESSBUILDER to Internal Flash Memory first except
BTO (Built to order). For details, refer to
(2) Manage Internal Flash Memory
in
Chapter 2 (5.4 Configure EXPRESSBUILDER Settings)
.
Press <F3> key when the following message appears on POST screen. At this time,
be sure to remove a
bootable disc from the optical disk drive
.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
If
<F3> Internal Flash Memory
is not displayed on POST screen
, make sure that Internal Flash
Memory is connected correctly by referring to a) in
Chapter 2 (5.4 Configure EXPRESSBUILDER Settings) -
(2) Manage Internal Flash Memory
.
When EXPRESSBUILDER is started from Internal Flash Memory, Boot Selection Menu shown in
Chapter 2
(5.2 Menu) - (1)
Boot Selection Menu
appears.