NEC N8100-1005F, User Manual

Page: 229 / 314

Upgrading Your Server 9-19
PCI Board
The server is equipped with five slots for installing PCI boards.
IMPORTANT:
„
Any PCI board is easily affected by static electricity. Handle a
PCI board after making your body contact with a metallic frame
section of the server to discharge the static electricity on your body.
Do not make bare hands contact with terminals and components on
the PCI board. In addition, do not put the PCI board on a desk
directly. See "Static Precautions" in this chapter for details of the
static electricity.
„
The long-sized board (full-length board) can be installed only to the
PCI slots #2 or #3. Care must be taken to avoid damage to the
components on the mother board when installing the long-sized
board.
Mother board
NOTE:
To install the PCI board, make sure the shape of the board
connector matches with the shape of the PCI board slot connector.
PCI slot #1 (PCI Express)
PCI slot #2 (64-bit/100 MHz)
PCI slot #3 (64-bit/100 MHz)
PCI slot #4 (32-bit/33 MHz)
PCI slot #5 (32-bit/33 MHz)