NEC N8100-1005F, User Manual

Page: 196 / 314

8-16 Troubleshooting
Unable to update the system
T
Are you trying to update the system without applying Service Pack or with Service
Pack 1, 2, or 3?
Without applying Service Pack and applying Service Pack 1, 2, or 3 to this system are
not supported.
You have to apply Service Pack 4 to update the system.
If you use Windows 2000 CD-ROM which includes Service Pack 4 to install
Windows 2000 on your system, you do not have to apply Service Pack 4 again
when you update the system.
The OS presents unstable operation:
T
Did you update the system?
→
Installing a network drive after installation of the OS may cause unstable
operation. Use the NEC EXPRESSBUILDER CD-ROM to update the system.
(See Chapter 6.)
The system does not restart automatically when a stop error occurs, though the system is
adjusted to automatically restarting:
→
When the system does not restart automatically, restart it manually.
The system restarts automatically when a stop error occurs, though the system is NOT
adjusted to automatically restarting:
→
There is no problem about this issue.
Check the System Event Log to confirm that STOP error occurred.
Cannot turn the power OFF at the blue screen:
→
If you want to turn off the power at the blue screen, execute forced shutdown
(forced shutdown: continue to press POWER/SLEEP switch for 4 seconds). The
power will not be turned off if you press the switch for less than 3 seconds.