NEC N8100-1005F, User Manual

Page: 108 / 314

5-4 Installing the Operating System with Express Setup
Microsoft Windows Server 2003
This subsection provides information on installing Microsoft® Windows® Server 2003 in the server.
Read instruction in this section before proceeding the installation.
NOTE: If you install Windows Server 2003 without using Express
Setup, see Appendix D.
Installation Notice
This section explains precautions and matters you should be aware of before beginning installation
in order to install Windows Server 2003 correctly.
Supported OS on this model
The server supports the following edition:
„
Microsoft Windows Server 2003 Standard Edition (hereinafter, referred to as "Windows
Server 2003")
On installing other OS, contact sales dealer or the maintenance service representative.
Installing Optional Mass Storage Driver
To install optional mass storage driver, see "Installing Optional Mass Storage Driver" of
"Configuration Diskette Creator" in Chapter 6 to create setup inf file.
BIOS Specification
Before installing Windows Server 2003, confirm if the BIOS specification of the hardware is correct.
See Chapter 4 to specify them.
NEC ESMPRO Agent
On Windows Server 2003 systems, the ESMPRO Agent needs the necras.sys driver. To install the
necras.sys, run the System update from NEC EXPRESSBUILDER CD-ROM.
Optional Board Supported by NEC EXPRESSBUILDER
The NEC EXPRESSBUILDER CD-ROM attached to your system supports the following optional
boards;
„
Raid Controller and SCSI Controller
– N8103-65F SCSI Controller
– N8103-75 SCSI Controller
– N8103-78F Disk Array Controller
– N8103-80F Disk Array Controller
– S-ATA HostRAID