manualshive.com logo in svg

NEC N8100-1005F, User Manual

Share
Download
NEC N8100-1005F User Manual Download Page 212

9-2  Upgrading Your Server

SAFETY NOTES

Observe the following notes to install or remove optional devices safely and properly.

WARNING

Observe the following instructions to use the server safely.    Failure to follow
these instructions may result in death or serious personal injury.    See pages 1-
3 to 1-8 for details.

■

 

Do not disassemble, repair, or alter the server.

■

 

Do not remove the lithium battery.

■

 

Do not look into the CD-ROM drive.

■

 

Disconnect the power plug before working with the server.

CAUTION

Observe the following instructions to use the server safely.    Failure to follow
these instructions may cause a fire, personal injury, or property damage.    See
pages 1-3 to 1-8 for details.

■

 

Avoid installation in extreme temperature conditions.

■

 

Make sure to complete board installation.

■

 

Protect the unused connectors with the protective cap.

■

 

Never attempt to lift the server only by yourself.

Summary of Contents for N8100-1005F



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands