NEC N341I, Using Manual

Page: 19 / 109

5
Changing the battery
Make sure the phone is switched off. Some settings may be lost if the battery is removed while the power is on.
☛
Slide the battery catch towards the base of the phone
q
and lift the battery out
w
.
☛
Put the new battery pack in the base first then lower it into place
e
.
Charging a battery
The charger unit begins to restore the battery power when it is connected to the phone.
☛
Connect the charger plug (AC adapter) into the connector at the left side of the phone.
Check the LED glows red.
When charging is completed, the LED goes out. The charging icon will be displayed
as described even when the phone is switched off during charging (Fig 1).
You are recommended to switch off the phone during charging.
If you need to receive calls, your phone can be switched on and left in standby while
being charged, although the total time taken to charge is then increased.
Your phone is designed to be charged with the NEC equipment listed with the specifications of your phone.
O
If the phone does not respond when you first turn the charger on, please wait for a few minutes. The charging will then start.
I
Do not try to charge the battery if the ambient temperature is below 0 °C or above 45 °C.
O
If you use the phone during charging, handle the phone carefully since the cable or adapter is connected.
O
You can also charge the phone by using Desktop charger (option).
Charging
icon
I
Using any battery pack, AC
adapter, Vehicle power adapter
(option) or Desktop charger
(option) not specified by NEC for
use with this phone can be
dangerous and may invalidate
any warranty and approval
given to the cellphone. Do not
connect more than one charger
at any time. Do not leave the
charger connected to the mains
supply when it is not in use.
Charger Connecter